01
Configuration Control
The panel build should state skin gauge, core, coating, thickness, finish, dimensions and film. This prevents a broad product name from hiding a different material allocation.
China ACP & ACM production
Aluminum Composite Panel Factory for Specification-Controlled Orders
DERACP manufactures aluminum composite panels for façade cladding, interior construction, signage, retail display and distributor stock programs. The factory discussion starts with how the panel will be used, then defines aluminum skin, core, coating, finish, dimensions, protective film and packing as one coordinated specification.
Founded in 2000Company history stated by DERACP
6 production linesBatch and project scheduling
PE / PVDF / FRApplication-based panel structures
Custom export supplySize, film, marking and packing
Factory evidence before a price comparison
An ACP Factory Should Make the Panel Build Easy to Verify
A low unit price has little value when the quotation leaves out the aluminum gauge, coating system, core composition, color standard or packing method. DERACP organizes factory communication around a written build-up so buyers can compare like with like.
This factory-oriented approach is useful for importers, façade contractors, sign makers and private-label buyers because apparently similar 3 mm or 4 mm sheets can differ substantially in material allocation and intended service condition. A clear order specification also gives production, inspection and shipping teams the same reference.
- Define interior, exterior, signage or specialized use before selecting the panel.
- Record face and back aluminum skin thickness rather than only total panel thickness.
- Match PE, PVDF or other surface systems to exposure and expected appearance.
- Link fire-related descriptions to the exact core, test method and supplied construction.
- Approve color, gloss, film direction, labels and export packing before mass production.
Production information that supports procurementFactory layout, panel configuration, inspection points, sample approval and packing details should be discussed together—not as separate afterthoughts.
What professional buyers need from a factory
Production Capability Is More Than the Number of Lines
High-ranking industry pages commonly emphasize product variety, production equipment, certifications, samples and technical service. For a buyer, these points become useful only when they are translated into order-specific controls.
02
Sample-to-Batch Continuity
A color chip or sample should be connected to a written reference, gloss range and production order. Where appearance is critical, physical approval is more reliable than a screen image.
03
Repeat-Order Discipline
Distributors need stable specifications, batch identification and retained references so a repeat order can be checked against the approved construction rather than recreated from memory.
04
Fabrication Awareness
Routing, bending, printing, lamination and cassette forming place different demands on flatness, skin thickness, coating and protective film. The factory should know the downstream process.
05
Documentation Alignment
Test reports and declarations should correspond to the actual panel configuration and referenced standard. Product-family documents are not automatically interchangeable with every order.
06
Export Readiness
Sheet dimensions, pallet format, edge protection, unloading method and container plan affect damage risk and landed handling. Packing should be written into the order specification.
Configurable panel platform
ACP and ACM Production for Different Service Conditions
DERACP can discuss panel structures for different markets and applications. Final suitability depends on the approved specification, installation system, local rules and project environment.
Architectural and decorative
Solid, Metallic and Custom Colors
Color, gloss and coating system can be planned for façade, interior, retail and distributor programs, with physical sample approval where required.
Fabrication focused
Routing, Folding and Forming Grades
Panel thickness, skin gauge and core selection can be coordinated with cutting, grooving, folding and installation methods.
Project requirement
Fire-Retardant Core Options
Core selection and supporting documents are discussed against the specified test method and classification rather than a general “fireproof” label.
Reflective finish
Mirror and Anodized Surfaces
Reflective decorative panels for shopfronts, signage, interiors and selected architectural features, subject to handling and application guidance.
Wholesale assortment
Distributor Color Programs
Fast-moving colors, sheet sizes, panel grades and pallet combinations can be planned around a regional market and repeat-order strategy.
OEM and project supply
Custom Film, Marking and Packing
Protective film printing, bundle identification, private-label details and shipment configuration can be confirmed for qualified orders.
From inquiry to shipment
A Factory Workflow That Keeps Commercial and Technical Details Connected
The following sequence helps reduce specification drift between the buyer’s request, the approved sample, production instructions and packed goods.
01
Application Review
Clarify location, exposure, fabrication, installation, expected appearance and applicable project requirements.
02
Panel Build Proposal
Define total thickness, face and back skin, core, coating, finish, size, film and preliminary packing.
03
Sample Confirmation
Review physical color, gloss, texture, finish direction and visual acceptance when the project requires it.
04
Order Specification
Fix quantity by color, tolerances, marks, documents, shipment terms and agreed exceptions in writing.
05
Material Coordination
Prepare aluminum, core, adhesive-related inputs, coating references and protective film for the approved order.
06
Panel Production
Run the specified panel construction with process checks tied to the order and intended downstream fabrication.
07
Batch Inspection
Check surface, dimensions, thickness, flatness, color consistency, film and other agreed acceptance items.
08
Packing and Loading
Identify bundles, protect faces and edges, prepare pallets and coordinate loading for the destination handling plan.
Factory specification framework
Common Aluminum Composite Panel Production Options
These ranges are practical sourcing references based on DERACP product information. Availability, tolerances, minimum quantities and final values should be confirmed for each quotation.
| Specification | Common / configurable options | Why it matters |
|---|---|---|
| Total panel thickness | Commonly 2.5 mm, 3 mm, 4 mm, 5 mm and 6 mm | Influences rigidity, weight, routing depth, handling and system design. |
| Aluminum skin | Approx. 0.08 mm to 0.50 mm depending on grade and use | A major cost and performance variable; face and back skins should be stated separately. |
| Core | PE core, mineral-filled fire-retardant core and project-specific structures | Affects fire behavior, weight, fabrication and panel cost. |
| Surface coating | PE, PVDF, FEVE, nano and selected decorative surface systems | Should reflect indoor or exterior exposure, UV demand, cleaning and appearance. |
| Finish | Solid, metallic, high gloss, brushed, mirror, wood, marble and printing-oriented surfaces | Controls visual result, matching, handling and protective-film requirements. |
| Sheet dimensions | 1220 × 2440 mm is common; 1250 mm, 1500 mm widths and custom lengths may be discussed | Optimized size can reduce cutting waste, joints and container-loading complexity. |
| Protective film | Standard or custom printed film, peel direction and marking subject to confirmation | Protects the finish through fabrication, transport and installation. |
| Packing | Stacked sheets, edge protection, palletized or reinforced export packing | Should match panel size, route, unloading equipment and storage plan. |
Fire-performance note: A classification applies only to the tested or documented panel construction and referenced method. Buyers should verify that reports, core formulation, skin arrangement and supplied product correspond to the project requirement.
Inspection should follow the written orderThe useful question is not whether a factory “has QC,” but which acceptance points are checked for the exact batch.
Batch-oriented quality planning
Quality Gates Buyers Can Put Into the Purchase Specification
DERACP states that it operates a quality-control system. For commercial purchasing, that system becomes more useful when inspection items and acceptance references are agreed before production.
Material Identity
Confirm the ordered skin gauge, core type, coating reference and protective film against production records.
Panel Dimensions
Check total thickness, width, length and practical tolerance at agreed sampling points.
Surface Appearance
Review visible defects, color, gloss, texture or finish direction under agreed conditions.
Bonding and Fabrication
Discuss peel or bonding checks and trial routing or bending where downstream processing is important.
Batch Consistency
Identify production lots and compare color-sensitive orders with the approved reference.
Packing Verification
Confirm sheet count, film coverage, labels, corner protection, pallet condition and loading arrangement.
Buyer-specific factory support
Different Customers Need Different Answers From an ACP Factory
Distributors & importers
Repeatable stock programs
Color mix, quality tiers, private labels, pallet planning, container utilization and repeat-order references.
Façade contractors
Project-defined construction
Exterior coating, aluminum gauge, panel size, fabrication, color control and fire-related documentation.
Sign fabricators
Processing and surface efficiency
Flatness, routing, printing or lamination compatibility, film, sheet yield and economical formats.
Architects & consultants
Traceable specification inputs
Finish samples, construction data, stated limitations and documents corresponding to the selected panel.
Retail & interior contractors
Appearance-led production
Gloss, texture, decorative finishes, edge quality, custom dimensions and coordinated batches.
OEM brands
Private-label order details
Panel build, film printing, bundle marks, color naming, packing instructions and shipment documentation.
Real DERACP website images
Product and Application Image Display
The images below are sourced from the DERACP website and show representative panel finishes and use environments. Final color, structure and suitability should be confirmed through samples and written specifications.
Factory selection guide
How to Compare an ACP Panel Factory in China
When evaluating an ACP panel factory in China—or an aluminium composite panel factory serving international specifications—request the same information from every factory instead of asking only for the lowest price. This creates a transparent comparison and makes omissions visible before an order is placed.
Ask for the layer build-up
Total thickness alone is incomplete. Request face skin, back skin, core, coating and film.
Check application fit
A sign-grade panel and a long-term exterior panel should not be compared as identical materials.
Connect samples to orders
Color and finish approval should have a reference that appears in the production instruction.
Verify relevant documents
Review scope, test method, product build and validity rather than relying on a certificate title.
Review packing before shipment
Confirm pallet size, edge protection, sheet count, labels, container plan and unloading method.
Plan repeat orders
Ask how batch records, approved samples and color references are retained and used.
Useful RFQ attachmentInclude drawings, elevation quantities, fabrication details, color references, destination port and required standards where available.
Continue product research
Related DERACP Aluminum Composite Panel Resources
Use these six related pages to compare manufacturing, supply and finish options before preparing a detailed factory inquiry.
01Aluminum Composite Panel ManufacturerReview project-oriented ACP manufacturing options and buyer scenarios.
02ACP Sheet ManufacturerCompare sheet structure, thickness, coating, core and export supply details.
03Aluminum Composite Panel SupplierExplore sourcing support for contractors, importers and distributors.
04Fireproof ACP Sheet OptionsReview fire-retardant panel families and confirm project-specific documentation.
05Brushed Aluminum Composite PanelSee metallic brushed surfaces for interior and decorative fabrication.
06Mirror Aluminum Composite PanelsCompare anodized reflective finishes for architectural and display applications.
Buyer questions
Aluminum Composite Panel Factory FAQ
What information should I send to an aluminum composite panel factory?
Provide the application, indoor or exterior location, total thickness, face and back aluminum skin, core requirement, coating, finish, color reference, sheet size, quantity, destination port, packing preference and any required test method. Drawings and photos can improve the factory’s understanding of fabrication and installation.
Are ACP and ACM the same material?
ACP commonly means aluminum composite panel, while ACM means aluminum composite material. In commercial sourcing, the terms are often used for the same sandwich panel family. The important point is to confirm the exact aluminum skins, core, coating and total construction instead of relying on the abbreviation.
Can DERACP produce custom panel thickness, skin gauge and sheet size?
DERACP can discuss custom total thickness, aluminum skin, width, length, finish, protective film and packing. Feasibility, tolerance, minimum quantity and schedule depend on the selected structure and should be confirmed in the quotation.
Should I choose PE or PVDF coating?
PE coating is commonly considered for interior decoration, displays and protected applications where broad color options and cost control are priorities. PVDF systems are generally considered for exterior exposure requiring stronger weathering performance. Final selection should reflect climate, installation, expected service period and project specification.
Does “fireproof ACP” automatically mean B1 or A2?
No. Fire performance depends on the core formulation, aluminum skins, adhesive system, complete panel build and the test method used. Buyers should state the required standard and verify that the supporting document corresponds to the exact supplied configuration.
Can I request samples, and how are MOQ and lead time decided?
Standard color or structure samples may be discussed before bulk production. Minimum quantity and lead time vary with coating, finish, dimensions, color matching, protective film, documentation and production schedule. DERACP should confirm these items after reviewing the complete specification.
Build the quotation around the real panel
Send DERACP Your ACP or ACM Factory Requirement
Describe where the panel will be used and the structure you need. DERACP can review coating, aluminum skin, core, finish, sheet dimensions, protective film, packing and shipment information before preparing a project-based quotation.