01
Control viewing direction
Metallic ACP panels can appear lighter, darker or more reflective from different angles. Keep fabrication and installation orientation consistent across visible elevations, especially on large modules.
Architectural metallic ACP / ACM
Metallic Aluminum Composite Panel for Controlled Architectural Color & Light
DERACP supplies metallic aluminum composite panel options for façades, interior walls, retail environments, columns, ceilings, signage and distributor programs. Specify silver, gold, champagne, bronze or other metallic directions together with the panel build, coating, gloss, orientation and sample approval method—not as a color name alone.
Actual DERACP website product image
Silver · Gold · Metallic surfaces
20+ YearsACP manufacturing experience stated by DERACP
6 LinesProduction-line capability listed in current company information
2.5–6 mmPanel thickness range referenced across DERACP product information
0.08–0.50 mmPublished aluminum skin discussion range for different panel grades
Why metallic is different
A Metallic ACP Finish Is an Optical Specification, Not Just a Paint Color
A metallic finish ACM panel interacts with daylight, artificial lighting and viewing angle. That means procurement needs to control more than the nominal shade. Metallic particle orientation, gloss, coating system, panel direction and batch consistency can all change how a wall reads after installation.
02
Approve a physical sample
Screen images are useful for shortlisting silver, champagne or gold aluminum composite panel directions, but a physical sample gives the project team a better reference for gloss, sparkle and undertone.
03
Lock color to the panel build
Record metallic finish, coating, total thickness, aluminum skins, core, dimensions and visible side together. A sample should represent the intended construction as closely as practical.
Project decision rule: if the surface will be visible across multiple panels, elevations or replacement phases, write the metallic direction, installation orientation and approved sample reference into the purchase specification rather than relying on “silver” or “gold” alone.
Finish selection
Silver, Gold and Metallic Color Directions for Different Design Intent
Metallic ACP panel selection should begin with the visual role of the surface. The right choice for a quiet corporate façade can be different from the right choice for a retail feature wall or hospitality interior.
Silver Metallic ACP
A practical modern direction for façades, column wraps, transport-related interiors, commercial walls and signage where a neutral metal appearance is wanted.
Gold Aluminum Composite Panel
Used when the design calls for a warmer decorative statement in retail, hospitality, display, ceiling or feature-wall applications. Confirm gloss and undertone against the project lighting.
Champagne / Bronze
Useful between neutral silver and stronger gold. These warmer metallic directions can coordinate with glass, stone, wood-look finishes and dark architectural palettes.
Custom Metallic Direction
For project-driven colors, send a color code, coated metal chip or approved physical reference and identify whether the desired result is metallic, pearlescent, brushed or mirror-like.
Finish names are descriptive directions. Final appearance, feasibility and tolerances should be confirmed in the quotation and approved sample for the exact order.
Surface comparison
Metallic ACP vs Brushed ACP vs Mirror ACM
These surface families can all look “metal-like,” but they behave differently. Selecting the wrong family can create avoidable approval or installation problems.
| Surface family | How it looks | Directionality | Useful applications | What to approve |
|---|---|---|---|---|
| Metallic ACP | Metallic sparkle and changing light response within a color family | Often visually directional | Façades, cladding, corporate interiors, columns, ceilings | Color, metallic effect, gloss, panel orientation, batch reference |
| Brushed ACP | Linear metal grain with a tactile industrial appearance | Strong grain direction | Retail, elevators, displays, interior feature walls, signage | Brush pattern, grain direction, tone, protective film |
| Mirror ACM | Highly reflective decorative surface | Reflection dominates | Interior display, ceilings, decorative walls, shopfitting | Reflectivity, distortion expectation, handling and cleaning |
| Solid Color ACP | More uniform non-metallic color field | Usually less direction-sensitive | Signage, walls, branding, broad architectural palettes | Color reference, gloss, coating and acceptable tolerance |
Real DERACP surfaces
Product Image Gallery
The images below are hosted on the DERACP website. They show representative color, brushed and reflective surface directions; final production appearance should be confirmed against the agreed physical sample and order specification.
Specification planning
Build the Metallic Aluminum Composite Panel Around the Actual Project
The values below are practical discussion ranges reflected in current DERACP product information. They are not a universal specification for every application. Final thickness, skin, core, coating, dimensions, testing and tolerances should be confirmed for the selected construction.
Published DERACP reference directions
- Common panel thickness discussions from approximately 2.5 mm to 6 mm depending on product family.
- Aluminum skin references from approximately 0.08 mm to 0.50 mm across different grades.
- 1220 × 2440 mm is a common reference sheet format, with project sizes discussed separately.
- PE and PVDF coating directions are published for different interior/exterior requirements.
- PE core and fire-retardant core directions can be discussed according to the project requirement.
- Custom color, finish, protective film, branding and export packing can be reviewed.
Include these items in the RFQ
ApplicationInterior / exteriorTotal thickness
Front skinBack skinCoreCoating
Metallic colorGlossDirectionWidth × length
QuantityFilmPackingDestination
For façade or regulated building work, also identify the required fire classification, test method, system details and document scope. Do not assume a test report for one construction automatically applies to another thickness, core or installation assembly.
Coating by exposure
Choose the Coating for Service Conditions, Not Only for Appearance
Metallic color gets the attention, but coating selection can be the more important technical decision. The same silver aluminum composite panel appearance may be specified differently for a controlled interior than for long-term exterior cladding.
Interior & controlled environments
PE-coated metallic ACP may be considered for many interior decoration, retail, exhibition, ceiling and display requirements where exterior weathering is not the main design condition.
- Confirm cleaning chemicals and maintenance method.
- Check routing, folding, edge treatment and substrate.
- Approve appearance under the real lighting temperature.
- Protect visible surfaces through fabrication and installation.
Exterior & weather-exposed applications
For exposed architectural cladding, discuss PVDF or another project-suitable coating together with aluminum skin, core, fixing system, climate and documentation requirements.
- Coordinate finish direction across the elevation.
- Define replacement-panel color and batch strategy.
- Review joints, support spacing and fabrication details.
- Confirm the exact test/document scope required by the project.
Application-led selection
Where Metallic ACP Panels Create the Most Value
The finish should support the design and the fabrication workflow. Use the application to decide how much visual control, coating durability, aluminum skin and documentation the purchase requires.
Façade & Rainscreen
Silver, champagne and bronze metallic directions can give a façade a controlled metal appearance. Review coating, core, skins, orientation and applicable system requirements.
Retail & Hospitality
Gold and warmer metallic finishes can support feature walls, counters, ceilings, columns and branded environments where lighting strongly affects appearance.
Corporate Interiors
Silver and grey metallic ACM can create a technical, neutral visual language for reception walls, elevator surrounds, partitions and architectural details.
Signage & Display
Metallic backgrounds can create contrast for dimensional letters and display systems. Confirm routing, bonding, printing or vinyl compatibility before production.
Buyer-specific guidance
What Different Buyers Should Ask Before Ordering Metallic ACM
Architect / façade contractor
Prioritize coating system, aluminum skins, core/fire requirement, module size, metallic direction, joint design, fixing-system interface, test documents and retained approval sample.
Fabricator / sign maker
Prioritize flatness, routing and folding behavior, visible side, protective film, adhesion or print method, finished yield, handling and edge appearance.
Distributor / OEM buyer
Prioritize repeatable SKUs, popular silver/gold/bronze directions, price-grade structure, private-label film, carton/pallet marks, reorder references and batch identification.
Color approval workflow
Reduce Metallic Finish Risk Before Bulk Production
1
Send the design target
Provide silver, gold, RAL direction, coated chip, competitor sample or another physical reference together with the end use.
2
Define the finish family
State metallic, brushed, mirror, solid or pearlescent/chameleon intent. Similar online images can represent very different surface technologies.
3
Review a physical sample
Evaluate in representative daylight and artificial light, noting gloss, undertone, sparkle and directional behavior.
4
Reference it in the order
Connect the approved sample identity to coating, panel build, dimensions, quantity, packing and future repeat-order records.
Related DERACP resources
Continue From Metallic Finish to Complete ACP Specification
These six DERACP pages are directly relevant to color approval, neighboring metallic surface families and custom project purchasing.
Color planningACP Color ChartCompare solid, metallic and decorative color directions before requesting samples.
Custom finishCustom Color ACP PanelsPlan RAL, Pantone or physical-sample matching for project-controlled colors.
Directional metalBrushed Aluminum Composite PanelCompare a linear brushed metal appearance with painted metallic ACP.
Reflective surfaceMirror Aluminum Composite PanelsExplore silver, gold and decorative reflective ACM directions.
Gloss comparisonHigh Gloss Aluminum Composite PanelReview bright glossy surfaces where reflectivity is more important than metallic sparkle.
Product selectionAluminum Composite Panel CatalogCompare panel construction, coatings, finishes, dimensions and document needs.
FAQ
Metallic Aluminum Composite Panel Questions
What is a metallic aluminum composite panel?
It is an ACP/ACM panel with a surface designed to create a metallic visual effect, typically through a coated finish that reflects light differently from a flat solid color. The complete product still needs to be specified by panel thickness, aluminum skins, core, coating, dimensions and intended application.
Can DERACP supply silver aluminum composite panel and gold aluminum composite panel finishes?
DERACP product imagery and color resources show silver, gold, champagne, brushed and reflective directions. The exact color, coating, gloss, structure and availability should be confirmed against a physical sample and formal quotation for the intended order.
Is metallic ACP suitable for exterior cladding?
Metallic ACP can be discussed for exterior cladding when the coating, aluminum skins, core, panel build, fabrication, fixing system and required project documents are suitable for the application. PVDF is a common exterior coating direction, but the exact specification should be project-reviewed.
Why should metallic panels be installed in the same direction?
Metallic particles and surface orientation can change how light is reflected. If adjacent panels are rotated, the façade may show unintended light/dark shifts even when the panels come from the same nominal color.
What information should I send for a metallic ACP quotation?
Send application, interior/exterior exposure, total thickness, front and back aluminum skins, core requirement, coating, target metallic color or sample, gloss, width, length, quantity, destination, protective film and packing requirements. For regulated projects, add the required fire classification, test method and document scope.
Can metallic ACP be customized for distributor or OEM programs?
DERACP states that custom panel structure, color/finish, dimensions, protective film and packing can be reviewed. For a repeat-order program, it is useful to define SKU codes, retained color samples, labeling and batch-reference rules from the beginning.
Send DERACP the Metallic Finish You Need to Match
Share the application, silver/gold/metallic color reference, coating requirement, panel thickness, aluminum skins, core, sheet size, quantity and destination. If appearance is critical, include a physical reference or request a sample approval route before bulk production.