Welcome!
Although everyone knows that the products of aluminium composite panel manufacturers can be used as partition walls, the specific methods of use may not be understood by many people. If you want to achieve better results, you can't understand this information.
When making the partition wall, it is necessary to use the aluminum composite material panel with a thickness of 6mm or more, and then use the 3.5200mm countersunk head screw to fix it. It should be noted that the nail head should be 0.5mm lower than the surface of the board to ensure the flat surface. The exact position of the keel must be marked and marked. The distance between the center of the vertical keel is 450-600mm. The joints of the wall and the sides of the doors and windows should be installed with additional keels. If the height of the wall is greater than 2440mm, it must be in the plate. Support the keel at the joint.
During installation, the gap between the ACP sheets is 4-6mm. The manufacturer of the aluminum plastic panel recommends using 107 glue or super glue to mix thoroughly, then apply the scraper to the plate and the gap, and then use the paper tape or style tape to paste and flatten.
If you are interested in our products, please contact:
Scarlett Wang: +86 13956456096 (Tel & Whatsapp & Wechat）
Aluminum composite panel is a new type of building decoration material with the advantages of light quality, good stiffness, smooth surface, rich and colorful, convenient construction, etc. It is widely used in curtain wall, indoor and outdoor decoration and advertising signage, etc. It is an important decoration material reflecting modern architecture and decoration style.
Aluminum composite panel is a new type of building decoration material with the advantages of light quality, good stiffness, smooth surface, rich and colorful, convenient construction, etc. It is widely used in curtain wall, indoor and outdoor decoration and advertising signage, etc. It is an important decoration material reflecting modern architecture and decoration style.
Aluminium is the main base material in aluminium composite panels. From the point of view of use, aluminium plays a role in strengthening the support of the aluminium composite panel and is in contact with the surrounding environment through the coating. Therefore, the choice of aluminium has a great influence on the quality of the aluminium composite panel.
Aluminum composite panel is a new type of building decoration material with the advantages of light quality, good stiffness, smooth surface, rich and colorful, convenient construction, etc. It is widely used in curtain wall, indoor and outdoor decoration and advertising signage, etc. It is an important decoration material reflecting modern architecture and decoration style.
Aluminum composite panel is made of multi-layer materials, the upper and lower layer is high purity aluminum alloy panel, the middle is non-toxic low density polyethylene (PE) core panel, and its front side is also pasted with a protective film. For outdoor, the front side of the aluminum composite panel is coated with fluorocarbon resin (PVDF), and for indoor, the front side can be coated with non-fluorocarbon resin.